陈子辰

教授、博导

浙江大学发展委员会副主席，党委原常务副书记

办公电话：0571-87951951

通讯地址：浙江大学玉泉校区智泉大楼

电子邮件：chenzc@zju.edu.cn

一、个人履历

 1.教育背景

1965.09-1968.12　　福州一中 中学生

1978.10-1982.06　　浙江大学 精密机械专业 本科生

1982.09-1985.06　　浙江大学 机械制造与自动化专业 硕士生

1986.09-1989.10　　浙江大学 机械制造与自动化专业 博士生

 2.工作经历

1969.02-1971.01　　福建省邵武县朱坊公社 插队务农

1971.02-1978.09　　福建建西刃具厂 工人

1985.07至今  　         浙大任教，助教、讲师、副教授、教授

1989.06-1992.11　　先后任浙大机械系工艺教研室主任、副系主任兼系党总支委员

1992.12-1995.02　　浙江大学研究生院副院长兼校党委研究生工作部部长

1995.05-2005.03　　浙江大学党委副书记兼研究生院副院长，兼浙大微系统中心主任

2005.04-2011.12　　浙江大学党委 常务副书记 ，兼浙大现代制造工程研究所所长

2012.01至今　　　    浙江大学 先进技术研究院院长

(其中：分别于1996、2002年，应日本学术振兴会邀请，赴东京大学、东北大学等访问交流、合作研究半年；创建浙大微系统研究中心和浙江省先进制造技术重点实验室等。)

二、研究方向

1.精密机械热动态理论及热变形控制

2.微机电系统及微制造技术

3.数控加工系统及数控技术

4.精密工程及环境支撑技术

  长期以来致力于精密机械热态理论及监控技术、微纳加工及微机电系统研究，以及机械工程科学技术与生命科学交叉。先后承担了国家自然科学基金、国家重大科技攻关计划、国家攀登B计划、教育部博士后研究基金、浙江省重大科技计划等20余项任务，发表包括SCI、EI在内200余篇学术论文，授权的国家发明专利60多项，培养的研究生中已有43人获得博士学位。先后获得省部级科技进步奖10项，国家级教学成果奖3项，国务院学位委员会、国家教委授予的“做出突出贡献的中国博士学位获得者”、国务院特殊津贴、浙江省“有突出贡献中青年专家”等荣誉称号。

四、科研项目

1.国家“高档数控机床与基础制造装备”科技重大专项，基于敏感点监测的闭环动态综合补偿技术，2009ZX04014-026，2009.05-2010.12.

2.浙江省重点科技创新团队，高档数控机床及其关键技术，2009R50008，2010.01-2012.12.

3.浙江省重大科技专项，中高档数控机床控制系统，2006C11067，2006.01-2008.06.

4.国家自然科学基金项目，体内植入式热电-压电复合型柔性微发电构件研究，51275466，2013.01-2016.12.

5.国家自然科学基金项目，基于蝗虫杠杆-弹射跳跃机理的仿生微跳跃机构研究，50975251，2010.01-2012.12.

6.国家自然科学基金项目，基于蜘蛛振动感知机理的仿生多维微拾振构件及应用基础研究，50675193，2007.01-2009.12.

7.国家自然科学基金项目，无位置传感器的高速精密直线进给系统研究，50475101，2005.01-2007.12.

8.国家自然科学基金项目，网络协同商务链的理论与方法研究，70172016，2002.01-2004.12.

9.国家自然科学基金项目，精密设备仿生隔振系统研究，50075078，2001.01-2003.12.

五、发表论文

SCI论文

[1]  Dengqing Mei, Yanbing Feng, Miao Qian, Zichen Chen. An innovative micro-channel catalyst support with a micro-porous surface for hydrogen production via methanol steam reforming [J]. International Journal of Hydrogen Energy, 2016, 41(4):2268-2277.

[2] Guanhao Liang, Yancheng Wang, Deqing Mei, Kailun Xi, Zichen Chen. An analytical model for studying the structural effects and optimization of a capacitive tactile sensor array [J]. Journal of Micromechanics & Microengineering, 2016, 26(4):045007.

[3] Zhehe Yao, Deqing Mei, Zichen Chen. Modeling of metallic surface topography modification by high-frequency vibration[J]. Journal of Sound & Vibration, 2016, 363:258-271.

[4] Jintao Lai, Jianzhong Fu, Chenhui Xia, Zhiwei Lin, Guoqiang FU, Zichen Chen. Error compensation of free-form surface with critical area based on T-spline surface reconstruction [J]. International Journal of Computer Integrated Manufacturing, 2016:1-10.

[5] Miao Qian, Deqing Mei, Zoudong Yi, Yanbing Feng, Zichen Chen. Fluid flow and heat transfer performance in a micro-reactor with non-uniform micro-pin-fin arrays for hydrogen production at low Reynolds number [J]. International Journal of Hydrogen Energy, 2016.

[6] Guoqiang Fu, Jianzhong Fu, Yuetong Xu, Zichen Chen, Jintao Lai. Accuracy enhancement of five-axis machine tool based on differential motion matrix: Geometric error modeling, identification and compensation [J]. International Journal of Machine Tools & Manufacture, 2015, 89:170-181.

[7] Chenhui Xia, Jianzhong Fu, Jintao Lai, Xinhua Yao, Zichen Chen. Conjugate heat transfer in fractal tree-like channels network heat sink for high-speed motorized spindle cooling [J]. Applied Thermal Engineering, 2015, 90:1032-1042.

[8] Guoqiang FU, Jianzhong FU, Hongyao Shen, Xinhua Yao, Zichen Chen. NC codes optimization for geometric error compensation of five-axis machine tools with one novel mathematical model [J]. The International Journal of Advanced Manufacturing Technology, 2015, 80(9):1879-1894.

[9] Wu Y F, Wang W, Lu K Q, ZC Chen. A New Method for Registration of 3D Point Sets with Low Overlapping Ratios [J]. Procedia Cirp, 2015, 27:202-206.

[10] Zongwei Fan, Deqing Mei, KejiYang Zichen Chen. Sound field separating on arbitrary surfaces enclosing a sound scatterer based on combined integral equations.[J]. Ultrasonics, 2014, 54(8):2169-77.

[11] Guanhao Liang, Deqing Mei, Yancheng Wang, Zichen Chen. Modeling and Analysis of a Flexible Capacitive Tactile Sensor Array for Normal Force Measurement[J]. IEEE Sensors Journal, 2014, 14(11):4095-4103.

[12] Chenhui Xia, Jianzhong Fu, Yuetong Xu, Zichen Chen. A novel method for fast identification of a machine tool selected point temperature rise based on an adaptive unscented Kalman filter[J]. Journal of Zhejiang University-SCIENCE A, 2014, 15(10):761-773.

[13] Ya Zhang, Jianzhong Fu, Zichen Chen. Identification of Kinematic Errors of Five-axis Machine Tool Trunnion Axis from Finished Test Piece[J]. Chinese Journal of Mechanical Engineering, 2014, 27(5):999-1007.

[14] Zhehe Yao, Deqing Mei, Pei Tang, Zichen Chen. On the size effects in micro/meso semisolid extrusion–forging of A356 aluminum alloy [J]. The International Journal of Advanced Manufacturing Technology, 2014, 73(9):1243-1252.

[15] Miao Qian, Deqing Mei, Zhehe Yao, Binhong Liu, Xinyang Lou, Zichen Chen. Flow Manifold Optimization for a Uniform Velocity Distribution in a Laminated Microreactor with Micro‐Pin‐Fin Arrays[J]. Chemical Engineering & Technology, 2014, 37(7):1112-1120.

[16] Guoqiang Fu, Jianzhong Fu, Yuetong Xu, Zichen Chen. Product of exponential model for geometric error integration of multi-axis machine tools[J]. The International Journal of Advanced Manufacturing Technology, 2014, 71(9):1653-1667.

[17] Deqing Mei, Xinyang Lou, Miao Qian, Zhehe Yao, Lingwei Liang, Zichen Chen. Effect of tip clearance on the heat transfer and pressure drop performance in the micro-reactor with micro-pin–fin arrays at low Reynolds number[J]. International Journal of Heat & Mass Transfer, 2014, 70(2):709-718.

[18] Yancheng Wang, Kailun Xi, Guanhao Liang, Meging Mei, Zichen Chen,. A flexible capacitive tactile sensor array for prosthetic hand real-time contact force measurement[C]// IEEE International Conference on Information and Automation. IEEE, 2014:937-942.

[19] Chenhui Xia, Jianzhong Fu, Yuetong Xu, Zichen Chen. Machine tool selected point temperature rise identification based on operational thermal modal analysis[J]. The International Journal of Advanced Manufacturing Technology, 2014, 70(1):19-31.

[20] Guoqiang Fu, Jianzhong Fu, Yuetong Xu, Zichen Chen. Product of exponential model for geometric error integration of multi-axis machine tools [J]. The International Journal of Advanced Manufacturing Technology, 2014, 71(9):1653-1667.

[21] Qian Miao, Deqing Mei, Zhehe Yao, Binhong Liu, Xinyang Lou, Zichen Chen. Flow Manifold Optimization for a Uniform Velocity Distribution in a Laminated Microreactor with Micro‐Pin‐Fin Arrays[J]. Chemical Engineering & Technology, 2014, 37(7):1112-1120.

[22] Guanhao Liang, Deqing Mei, Yancheng Wang, Zichen Chen. Modeling and Analysis of a Flexible Capacitive Tactile Sensor Array for Normal Force Measurement [J]. IEEE Sensors Journal, 2014, 14(11):4095-4103.

[23] Ya Zhang, Jianzhong Fu, Zichen Chen. Identification of Kinematic Errors of Five-axis Machine Tool Trunnion Axis from Finished Test Piece [J]. Chinese Journal of Mechanical Engineering, 2014, 27(5):999-1007.

[24] Chenhui Xia, Jianzhong Fu, Yuetong Xu, Zichen Chen. Machine tool selected point temperature rise identification based on operational thermal modal analysis [J]. The International Journal of Advanced Manufacturing Technology, 2014, 70(1):19-31.

[25] YuAn Jin, Yong He, Jianzhong Fu, Zichen Chen. An interpolation method for the open CNC system based on EPM[J]. The International Journal of Advanced Manufacturing Technology, 2013, 69(1):405-416.

[26] Zhehe Yao, Deqing Mei, Hui Shen, Zichen Chen. A Friction Evaluation Method Based on Barrel Compression Test[J]. Tribology Letters, 2013, 51(3):525-535.

[27] Ya Zhang, Jianzhong Fu, Zichen Chen. Machining tests to identify kinematic errors of machine tool table rotation axis based on sensitive directions[J]. The International Journal of Advanced Manufacturing Technology, 2013, 67(1):495-500.

[28] Yong He, Jianzhong Fu, Peng Zhao, Zichen Chen. Enhanced polymer filling and uniform shrinkage of polymer and mold in a hot embossing process[J]. Polymer Engineering & Science, 2013, 53(6):1314–1320.

[29] Zhehe Yao, GapYong Kim, LeAnn Faidley, Qingze Zou, Deqing Mei, Zichen Chen. Acoustic Softening and Hardening of Aluminum in High-Frequency Vibration-Assisted Micro/Meso Forming[J]. Materials & Manufacturing Processes, 2013, 28(5):584-588.

[30] Jian-Ping Yu, Wen Wang, Keqing Lu, Deqing Mei, Zichen Chen. A planar capacitive sensor for 2D long-range displacement measurement[J]. Frontiers of Information Technology & Electronic Engineering, 2013, 14(4):252-257.

[31] Yaofeng Wu, Wen Wang, Keqing Lu, Yanding Wei, Zichen Chen. Noise reduction of laser scanning data based on self-estimated angular threshold[J]. Proc Spie, 2013, 8916:30.

[32] Jing Tian, Haibo Qiu, Zichen Chen, Yong Chen. poincaré section analysis to measure synchronization in coupled hamiltonian systems [J]. Modern Physics Letters B, 2013, 27(05):50036.

[33] Zhehe Yao, Deqing Mei, Zichen Chen. A Friction Evaluation Method Based on Barrel Compression Test [J]. Tribology Letters, 2013, 51(3):525-535.

[34] Deqing Mei, Miao Qian, Binhong Liu, Biao Jin, Zhehe Yao, Zichen Chen. A micro-reactor with micro-pin-fin arrays for hydrogen production via methanol steam reforming [J]. Journal of Power Sources, 2012, 205(2):367-376.

[35] Yao Zhehe, Kim Gap-Yong, Wang Zhihua, Faidley LeAnn, Zou Qingze,Mei Deqing, Chen Zichen. Acoustic softening and residual hardening in aluminum: Modeling and experiments[J]. International Journal of Plasticity, 2012, 39(39):75-87.

[36] Deqing Mei, Miao Qian, Binhong Liu, Biao Jin, Zhehe Yao, Zichen Chen. A micro-reactor with micro-pin-fin arrays for hydrogen production via methanol steam reforming[J]. Journal of Power Sources, 2012, 205(2):367-376.

[37] Yao, Zhehe, Kim, Gap-Yong , Faidley, LeAnn, Zou, Qingze, Mei, Deqing, Chen, Zichen. Effects of superimposed high-frequency vibration on deformation of aluminum in micro/meso-scale upsetting[J]. Journal of Materials Processing Technology, 2012, 212(3):640-646.

[38] Deqing Mei, Miao Qian, Zhehe Yao, Binhong Liu, Xinyang Lou, Zichen Chen. Effects of structural parameters on the performance of a micro-reactor with micro-pin-fin arrays (MPFAR) for hydrogen production [J]. International Journal of Hydrogen Energy, 2012, 37(23):17817-17827.

[39] Sheng Liu, Ting Fang, Zichen Chen. A Novel SFP Extracting/Tracking Framework for Rigid Microstructure Measurement [J]. Mathematical Problems in Engineering, 2012, 2012(2012):488-488.

[40] Zhehe Yao, Gap-Yong Kim, LeAnn Faidley, Qingze Zou, Deqing Mei, Zichen Chen. Effects of superimposed high-frequency vibration on deformation of aluminum in micro/meso-scale upsetting [J]. Journal of Materials Processing Technology, 2012, 212(3):640-646.

[41] Zhehe Yao, Gap-Yong Kim, Zhihua Wang, LeAnn Faidley, Qingze Zou, Deqing Mei, Zichen Chen. Acoustic softening and residual hardening in aluminum: Modeling and experiments [J]. International Journal of Plasticity, 2012, 39(39):75-87.

[42] Y Yao, Zhehe Kim, Gap-Yong Faidley, LeAnn Zou, Qingze Mei, Deqing Chen, Zichen.Experimental Study of High-Frequency Vibration Assisted Micro/Meso-Scale Forming of Metallic Materials[J]. Journal of Manufacturing Science & Engineering, 2011, 133(6):061009.

[43] Hongyao Shen, Jianzhong Fu, Zichen Chen, Weifeng Gan. Iso-Scallop Controlled Tool Path Generation for Free-Form Surfaces Based on Level Set Method[J]. Journal of Computational & Theoretical Nanoscience, 2011, 4(8):3140-3145.

[44] Yancheng Wang, Deqing Mei, Ziche Chen. Piezoresistive Slot-Cantilever Type Accelerometer Inspired from Spider's Slit Sensilla[J]. Sensor Letters, 2011, 9(4):1309-1315.

[45] Wen Wang, Yaohua Wen, Jianping Yu, Ziche Chen. Impact of Fringe Effect on Measuring Accuracy of Planar Capacitive Sensors[J]. Sensor Letters, 2011, 9(4):1458-1461.

[46] Zhehe Yao, Deqing Mei, Zichen Chen. Chatter suppression by parametric excitation: Model and experiments[J]. Journal of Sound & Vibration, 2011, 330(13):2995-3005.

[47] Zhenya He, Xinhua Yao, Jianzhong Fu, Zichen Chen. Volumetric Error Prediction and Compensation of NC Machine Tool Based on Least Square Support Vector Machine[J]. Journal of Computational & Theoretical Nanoscience, 2011, 4(6):2066-2070.

[48] Xinhua Yao, Zhenya He, Jianzhong Fu, Zichen Chen. Wireless Sensor Failure Identification Technology for Thermal Monitoring System of NC Machine Tools Based on Bayesian Networks[J]. Key Engineering Materials, 2011, 467-469:1832-1837.

[49] Ya Zhang, Jianzhong Fu, Zichen Chen. Application of Monte Carlo Method in the Measurement Process Design According to next Generation of GPS[J]. Advanced Materials Research, 2011, 189-193:96-101.

[50] Yao, Zhehe Kim, Gap-Yong Faidley, LeAnn Zou, Qingze Mei, Deqing Chen, Zichen. Experimental Study of High-Frequency Vibration Assisted Micro/Meso-Scale Forming of Metallic Materials[J]. Journal of Manufacturing Science & Engineering, 2011, 133(6):061009.

[51] Honghua Zhou, Deqing Mei, Zichen Chen. An Experimental Study on Micro Thixoforming Processing Parameters for Reaction Plate with Micro-Pin-Fin Arrays[J]. Advanced Materials Research, 2010, 154-155:907-912.

[52] Zhehe Yao, Deqing Mei, Zichen Chen. On-line chatter detection and identification based on wavelet and support vector machine[J]. Journal of Materials Processing Tech, 2010, 210(5):713-719.

[53] Hongyao Shen, Jianzhong Fu, Zichen Chen, Yongqiang Fan. Generation of offset surface for tool path in NC machining through level set methods[J]. The International Journal of Advanced Manufacturing Technology, 2010, 46(9):1043-1047.

[54] Deqing Mei, Zhehe Yao, Tianrong Kong, Zichen Chen. Parameter optimization of time-varying stiffness method for chatter suppression based on magnetorheological fluid-controlled boring bar[J]. The International Journal of Advanced Manufacturing Technology, 2010, 46(9):1071-1083.

[55] Wen Wang, Zhu Zhu, Zichen Chen. Design and Analysis of Two Dimensional X-Y Micropositioning Stage[J]. Proceedings of SPIE - The International Society for Optical Engineering, 2010, 7544(6):449-463.

[56] Yong He, Jianhzong Fu, Zichen Chen. Research on the Thermal Property of Machine Tool Slides Based on Cellular Structures[J]. Key Engineering Materials, 2010, 426-427:422-426.

[57] Xin Li, Deqing Mei, Zichen Chen. An Effective EMD-Based Feature Extraction Method for Boring Chatter Recognition[J]. Applied Mechanics & Materials, 2010, 34-35:1058-1063.

[58] Xiaolei Deng, Jianzhong Fu, Yong He, Zichen Chen, Huifeng Jiao. An Analysis of Thermal-Structural Characteristics for Precision Linear Rolling Guide CNC Grinding Machine Tool’s Bed[J]. Applied Mechanics & Materials, 2010, 37-38:86-89.

[59] Hongyao Shen, Jianzhong Fu, Zichen Chen, Yongqiang Fan. Generation of offset surface for tool path in NC machining through level set methods [J]. The International Journal of Advanced Manufacturing Technology, 2010, 46(9):1043-1047.

[60] Deqing Mei, Zhehe Yao, Tianrong Kong, Zichen Chen. Parameter optimization of time-varying stiffness method for chatter suppression based on magnetorheological fluid-controlled boring bar [J]. The International Journal of Advanced Manufacturing Technology, 2010, 46(9):1071-1083.

[61] Zhehe Yao, Deqing Mei, Zichen Chen. On-line chatter detection and identification based on wavelet and support vector machine [J]. Journal of Materials Processing Technology, 2010, 210(5):713-719.

[62] Deqing Mei, Tianrong Kong, Albert J.Smith, Zichen Chen. Magnetorheological fluid-controlled boring bar for chatter suppression [J]. Journal of Materials Processing Technology, 2009, 209(4):1861-1870.

[63] XinHua Yao, JianZhong Fu, Zichen Chen. Intelligent fault diagnosis using rough set method and evidence theory for NC machine tools [J]. International Journal of Computer Integrated Manufacturing, 2009, 22(5):472-482.

[64] Yong He, Jianzhong Fu, Zichen Chen. Analysis of pattern height development in hot embossing process[J]. Microsystem Technologies, 2009, 15(7):963-968.

[65] Mei, Deqing Kong, Tianrong Shih, Albert J. Chen, Zichen. Magnetorheological fluid-controlled boring bar for chatter suppression[J]. Journal of Materials Processing Technology, 2009, 209(4):1861-1870.

[66] Guanbin Gao, Wen Wang, Keng Lin, Zichen Chen. Structural Parameter Identification for Articulated Arm Coordinate Measuring Machines[C]// International Conference on Measuring Technology and Mechatronics Automation. IEEE Computer Society, 2009:128-131.

[67] Jianping Yu, Wen Wang, Xinxin Li, Zhu Zhu, Zichen Chen. Simulation Analysis on Characteristics of a Planar Capacitive Sensor for Large Scale Measurement[C]// International Conference on Intelligent Computation Technology and Automation. IEEE, 2009:201-204.

[68] Xinhua Yao, Jianzhong Fu, Zichen Chen. Intelligent fault diagnosis using rough set method and evidence theory for NC machine tools[J]. International Journal of Computer Integrated Manufacturing, 2009, 22(5):472-482.

[69] Xinhua Yao, Jianzhong Fu, Zichen Chen. A Reliability Analysis Method Based on Execution Scenario for Modular NC Software[J]. Key Engineering Materials, 2009, 392-394:640-644.

[70] Guanbin Gao, Wen Wang, Keng Lin, Zichen Chen. Kinematic Calibration for Articulated Arm Coordinate Measuring Machines Base on Particle Swarm Optimization[C]// Second International Conference on Intelligent Computation Technology and Automation. IEEE Computer Society, 2009:189-192.

[71] Yuguang Wu, Shuming Gao, Zichen Chen. Automated modular fixture planning based on linkage mechanism theory[J]. Robotics and Computer-Integrated Manufacturing, 2008, 24(1):38-49.

[72] Ren Kun, Jianzhong Fu, Zichen Chen. Look-ahead algorithm for velocity control based on parameterized curve interpolator [J]. Chinese Journal of Mechanical Engineering, 2008, 21(2):23-26.

[73] Zongwei Fan, Deqing Mei, Keji Yang, Zichen Chen. Acoustic radiation torque on an irregularly shaped scatterer in an arbitrary sound field [J]. Journal of the Acoustical Society of America, 2008, 124(5):2727-2732.

[74] Xinhua Yao, Jianzhong Fu, Zichen Chen. Bayesian networks modeling for thermal error of numerical control machine tools[J]. Journal of Zhejiang University-SCIENCE A, 2008, 9(11):1524-1530.

[75] Zongwei Fan, Deqing Mei, Keji Yang, Zichen Chen. Acoustic radiation torque on an irregularly shaped scatterer in an arbitrary sound field[J]. Acoustical Society of America Journal, 2008, 124(5):2727-2732.

[76] HongYao Shen, Jianzhong Fu, Zichen Chen. NURBS Interpolator Based on Dynamic Property of the Machine Tool[J]. Key Engineering Materials, 2008, 392-394:355-360.

[77] Yong He, Jianzhong Fu, Zichen Chen. EXPERIMENTAL STUDY ON THE HOT EMBOSSING POLYMER MICROFLUIDIC CHIP[J]. Chinese Journal of Mechanical Engineering, 2008, 21(3):87-89.

[78] Kun Ren, Jianzhong Fu, Zichen Chen. LOOK-AHEAD ALGORITHM FOR VELOCITY CONTROL BASED ON PARAMETERIZED CURVE INTERPOLATOR[J]. Chinese Journal of Mechanical Engineering, 2008, 21(2):23-26.

[79] Yong He, Jianzhong Fu, Zichen Chen. Optimization of control parameters in micro hot embossing[J]. Microsystem Technologies, 2008, 14(3):325-329.

[80] Shen Hongyao, Fu Jianzhong, Chen Zichen. AXIS-BASED LOOK-AHEAD INTERPOLATOR FOR MACHINING OF SURFACES REPRESENTED BY NURBS CURVES[J]. Machining Science & Technology, 2008, 12(4):546-562.

[81] Yong He, Jianzhong Fu, Zichen Chen. Research on optimization of the hot embossing process[J]. Journal of Micromechanics & Microengineering, 2007, 17(12):2420.

[82] Kun Ren, Jianzhong Fu, Zichen Chen. Research on new software compensation method of static and quasi-static errors for precision motion controller[J]. Journal of Zhejiang University-SCIENCE A, 2007, 8(12):1938-1943.

[83] Jianzhong Fu, Xiaobing Mi, Yong He, Zichen Chen. Modeling of the Ionized Fluid Flow through a Cone-Shaped Nanopore[J]. Solid State Phenomena, 2007, 121-123(2):1089-1092.

[84] Guochun Ji, Wen Wang, Yanjun Huang, Zichen Chen. Static and Dynamic Force Analysis to Large-Scale Bed of Leather Cutting Machine Tool[J]. Key Engineering Materials, 2007, 353-358:1927-1930.

[85] Deqing Mei, Xin Li, Zichen Chen. Prediction of Cutting Chatter Based on Hidden Markov Model[J]. Key Engineering Materials, 2007, 353-358:2712-2715.

[86] Hengfu Xiang, Jianzhong Fu, Zichen Chen. 3D Finite Element Modeling of Laser Machining PMMA[C]// IEEE International Conference on Nano/micro Engineered and Molecular Systems. IEEE, 2006:942-946.

[87] Fuqiang He, Wen Wang, Zichen Chen. Detection of small surface defects using DCT based enhancement approach in machine vision systems[J]. 2006, 6040:60400H-60400H-6.

[88] Xinxin Li, Wen Wang, Zichen Chen. Sliding Mode Based Controller for Magnetostrictive Actuator[C]// IEEE International Conference on Robotics and Biomimetics. IEEE, 2007:1266-1270.

[89] Tianrong Kong, Deqing Mei, Zichen Chen. Research on the Boring Chatter Suppression Based on MR Fluid[J]. Materials Science Forum, 2006, 532-533:365-368.

[90] Fuqiang He, Wen Wang, Zichen Chen. Automatic Visual Inspection for Leather Manufacture[J]. Key Engineering Materials, 2006, 326-328:469-472.

[91] Xinxin Li, Wen Wang, Zichen Chen. New Challenges in Precision Positioner Development[M]. 2005.

[92] Gang, Deqing Mei, Zichen Chen. A Horizontal Vibration Wave Model for High Speed Elevators[J]. Key Engineering Materials, 2005, 297-300:1585-1591.

[93] Deqing Mei, Tianrong Kong, Zichen Chen. Optimal design of magnetic system for the magnetorheological intelligent damper[C]// ICMIT 2005: Control Systems and Robotics. 2005:604244-604244-6.

[94] Yanjun Huang, Deqing Mei, Zichen Chen, et al. Research on an intelligent leather nesting system[J]. Mechanical & Electrical Engineering Magazine, 2005, 6040:60400R-60400R-6.

[95] Du X, Mei D, Zichen Chen. Research on the vertical dynamics of high-speed elevator system[J]. Proceedings of SPIE - The International Society for Optical Engineering, 2005, 6040:60400V-60400V-6.

[96] Shixiong Wu, Wen Wang, Zichen Chen. Multiple-sensor measurement directed by Proceedings of 2005 Chinese Control and Decision Conference [J]. 2005:1447-1450.

[97] Xinhua Yao, Xuezeng Pan, Jianzhong Fu, Zichen Chen. Research on real-time FSM modeling for microfabrication NC system[J]. Journal of Zhejiang University, 2005, 39(12):1965-1968+1997.

[98] Wujia Yu, Jianzhong Fu, Zichen Chen. Research on feedrate control strategy for sculptured surfaces machining with five-axis CNC [J]. Proceedings of 2005 Chinese Control and Decision Conference, 2005, 39(6):2177-2180.

[99] Xinhua Yao, Xuezeng Pan, Jianzhong Fu, Zichen Chen. A heuristic search algorithm based on hybrid-tasks system model for scheduling tasks of NC system[C]// Machine Learning and Cybernetics, 2005. Proceedings of 2005 International Conference on. IEEE, 2005:1026-1030 Vol. 2.

[100] Wujia Yu, Jianzhong Fu, Zichen Chen. A compound feedrate control method for multi-axis CNC machining [J]. Proceedings of 2005 Chinese Control and Decision Conference, 2005, 39(6):1188-1191.

[101] Zhang CL, Mei DQ, Chen ZC. H-infinity/mu robust control of vibration for an ultra-precision grinding machine [J]. ADVANCES IN GRINDING AND ABRASIVE PROCESSES, 2004, 259-2:682-686.

[102] Gang X Y, Yao Z H, Chen Z C. A Micro-Feed Actuator for Ultra-Precision Grinding of Brittle Materials[J]. 2004, 259-260:725-729.

[103]  Zhang C L, Yao Z H, Chen Z C. Hybrid Vibration Isolation of Inertial Vibration Feeders[J]. Key Engineering Materials, 2004, 259-260(2):798-803.

[104] Zhang C, Mei D, Chen Z. Fuzzy generalized predictive control of microvibration for a micro-manufacturing platform[C]// American Control Conference, 2003. Proceedings of the. IEEE, 2003:3690-3695 vol.5.

[105]  Zhang C L, Mei D Q, Chen Z C. Active Vibration Isolation of Micro-Manufacturing Platform Based on Neural Network[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 2002, 129(S1):634-639.

[106]  Liu, S Fu, JZ Liu, JH Ren, K Yang, HM Chen, ZC. Stereovision System for 3-D Measurement of MEMS Components[C]// International Symposium on Precision Mechanical Measurements. 2002.

[107]  Ju H, Wang W, Chen Z. Error Correction of Laser Scanning System for Reverse Engineering[C]// International Symposium on Precision Mechanical Measurements. 2002.

[108]   Du, SL Fu, JZ Chen, ZC. Optimal Actuator Placement for Piezothermoelectric Biotic Thermal Robust Structure[J]. China Mechanical Engineering, 2001.

中文论文

[1]     杨伟民,赵朋,匡唐清,傅建中,陈子辰. 流体辅助共注成型制品层厚的超声无损测量[J]. 浙江大学学报(工学版),2017,(01):192-197.

[2]     赵朋,颉俊,傅建中,陈子辰. 塑料光学透镜的磁悬浮检测[J]. 光学精密工程,2016,(04):756-763.

[3]     徐立军,陈子辰,李孝禄,王君. 柴油与二甲醚在线混合系统的设计与研究[J]. 汽车工程,2016,(03):274-279.

[4]     吴尧锋,王文,卢科青,魏燕定,陈子辰. 边界聚类椭圆快速检测方法[J]. 浙江大学学报(工学版),2016,(03):405-411.

[5]     吴尧锋,王文,卢科青,魏燕定,陈子辰. 边界聚类椭圆快速检测方法[J]. 浙江大学学报(工学版),2016,(02):346.

[6]     何振亚,傅建中,陈子辰. 基于球杆仪检测五轴数控机床主轴的热误差[J]. 光学精密工程,2015,(05):1401-1408.

[7]     吴尧锋,王文,卢科青,魏燕定,陈子辰. 逆向工程中基于语义的测量信息传递方法研究[J]. 计算机工程与应用,2015,(20):140-144+177.

[8]     邓小雷,傅建中,沈洪垚,陈子辰. 精密数控机床多主轴系统热平衡试验[J]. 浙江大学学报(工学版),2014,(09):1646-1653.

[9]     李晟,姚鑫骅,傅建中,陈子辰. 热电耦合无线传感能量管理系统及其在精密主轴热监测中的应用[J]. 光学精密工程,2014,(09):2389-2398.

[10] 邓小雷,傅建中,沈洪垚,陈子辰. 精密数控机床多主轴系统热平衡试验[J]. 浙江大学学报(工学版),2014,(08):1433.

[11] 谢长雄,徐月同,夏晨晖,陈子辰,傅建中. 皮卫星及其星箭分离机构的热-结构耦合与间隙设计[J]. 光学精密工程,2014,(07):1800-1807.

[12] 谢长雄,徐月同,傅建中,吴昌聚,陈子辰. 皮卫星星箭分离机构运动系统设计[J]. 宇航学报,2014,(06):626-632.

[13] 邓小雷,傅建中,夏晨晖,付国强,陈子辰. 数控机床主轴系统热模型参数多目标修正方法[J]. 机械工程学报,2014,(15):119-126.

[14] 范柏乃,张电电,陈子辰. 我国高校对口支援工作的实践模式及优化路径——基于“战略-组织-知识”的视角[J]. 教育发展研究,2014,(03):8-13.

[15] 倪虹,甄永乾,汪延成,梅德庆,陈子辰. 蝗虫起跳运动分析及仿生机构研究[J]. 振动与冲击,2014,(02):7-13.

[16] 邓小雷,傅建中,贺永,陈子辰. 精密数控机床主轴系统多物理场耦合热态特性[J]. 浙江大学学报(工学版),2013,(10):1863-1870.

[17] 蒋丰骏,徐月同,邓小雷,陈子辰. 手动托盘车焊接工艺的焊接变形仿真及预测[J]. 浙江大学学报(工学版),2013,(09):1625-1630.

[18] 章丽萍,朱凌,李晨,陈子辰. 试论两个中法工程师学院的办学意义[J]. 高等工程教育研究,2013,(04):22-27.

[19] 张亚,傅建中,陈子辰. 五轴数控机床万能主轴头空间误差建模研究[J]. 机械科学与技术,2013,(07):942-945.

[20] 李欣,梅德庆,陈子辰. 基于ICA的镗削过程颤振征兆信号分离方法研究[J]. 振动与冲击,2013,(09):5-9.

[21] 章丽萍,朱凌,李晨,陈子辰. 高层次工程人才联合培养的两个国际案例[J]. 高等工程教育研究,2013,(02):53-59.

[22] 唐培,梅德庆,姚喆赫,陈子辰. 半固态A356铝合金微凸台阵列触变成形充型过程数值模拟[J]. 中国有色金属学报,2012,(12):3334-3341.

[23] 张亚,傅建中,陈子辰. 摇篮式五轴机床空间误差的简化建模方法[J]. 机械设计,2012,(10):76-79.

[24] 章丽萍,姚威,陈子辰. 面向战略性新兴产业发展的工程科技人才培养研究[J]. 中国高教研究,2012,(10):25-29.

[25] 章丽萍,孔寒冰,陈子辰. 工程硕士学位教育的国际进展[J]. 高等工程教育研究,2012,(02):21-28.

[26] 蔡侃,应济,陈子辰,王硕. 基于CMAC和PID复合控制器的精密注塑机保压压力控制[J]. 中国机械工程,2011,(24):2986-2989.

[27] 卢颖,裴承艳,陈子辰,康凤举. 基于FBM模型的自相似流量建模仿真[J]. 电子设计工程,2011,(17):101-104.

[28] 王硕,应济,陈子辰,冯宇. 精密注塑机保压压力的新型模糊自校正控制[J]. 浙江大学学报(工学版),2011,(08):1370-1375.

[29] 钱淼,梅德庆,刘宾虹,陈子辰. 微凸台阵列型重整微反应器的传热传质特性[J]. 浙江大学学报(工学版),2011,(08):1387-1392.

[30] 李欣,梅德庆,陈子辰. 基于经验模态分解和希尔伯特-黄变换的精密孔镗削颤振特征提取[J]. 光学精密工程,2011,(06):1291-1297.

[31] 林谢昭,应济,陈子辰. 静电无阀微泵两种仿真模型的比较研究[J]. 哈尔滨工业大学学报,2010,(12):1943-1947.

[32] 孔天荣,李欣,梅德庆,陈子辰. 磁流变智能镗杆的动力学模型[J]. 浙江大学学报(工学版),2010,(11):2050-2055.

[33] 卢科青,王文,汪玮,陈子辰. 基于可变向测头的未知自由曲面数字化测量[J]. 浙江大学学报(工学版),2010,(11):2041-2049.

[34] 卢科青,王文,陈子辰. 基于双测头组合的未知自由曲面自适应采样[J]. 浙江大学学报(工学版),2010,(08):1433-1440.

[35] 高贯斌,王文,林铿,陈子辰. 圆光栅角度传感器的误差补偿及参数辨识[J]. 光学精密工程,2010,(08):1766-1772.

[36] 高贯斌,王文,林铿,陈子辰. 基于RBF神经网络的关节转角误差补偿[J]. 机械工程学报,2010,(12):20-24.

[37] 陈子辰,钟爱国. 苯羟乙酸锌(Ⅱ)配合物的合成与光谱表征[J]. 科学技术与工程,2010,(17):4233-4234.

[38] 林谢昭,应济,陈子辰. 基于能量辨识的非线性静电-结构系统的自由度缩减建模方法[J]. 固体力学学报,2010,(03):244-251.

[39] 卢科青,王文,陈子辰. 基于双测头组合的未知自由曲面自适应采样[J]. 浙江大学学报(工学版),2010,(06):1078.

[40] 卢科青,王文,陈子辰. 未知自由曲面数字化自适应采样方法[J]. 机械工程学报,2010,(09):143-149.

[41] 卢科青,王文,陈子辰. 点激光测头激光束方向标定[J]. 光学精密工程,2010,(04):880-886.

[42] 卢科青,王文,陈子辰. 点激光测头激光束方向标定[J]. 光学精密工程,2010,(03):731.

[43] 胡永乐,陈子辰,王峰超,白书欣,张虹. 内部爆炸加载条件下圆柱钢壳的动态断裂[J]. 机械强度,2010,(01):99-104.

[44] 李欣欣,王文,陈子辰. 超磁致伸缩致动器的广义预测-多模PID控制[J]. 光学精密工程,2010,(02):412-419.

[45] 王文,林铿,高贯斌,陈子辰. 关节臂式坐标测量机角度传感器偏心参数辨识[J]. 光学精密工程,2010,(01):135-141.

[46] 沈洪垚,傅建中,陈子辰. 基于轴向自适应的曲线插补算法[J]. 浙江大学学报(工学版),2010,(01):23-28.

[47] 张春良,郑文,梅德庆,陈子辰. 复杂激励环境下精密隔振系统的振动传递率研究[J]. 中国机械工程,2010,(01):1-5.

[48] 张春良,梅德庆,陈子辰. 基于遗传算法的振动主动控制系统反馈参数优化[J]. 中国机械工程,2009,(24):2912-2916.

[49] 孔天荣,梅德庆,陈子辰. 基于变结构刚度抑制精密孔镗削加工的颤振[J]. 光学精密工程,2009,(12):3040-3046.

[50] 孔天荣,梅德庆,陈子辰. 磁流变智能镗杆的动态特性测试与分析[J]. 浙江大学学报(工学版),2009,(12):2314-2318.

[51] 高贯斌,王文,林铿,陈子辰. 应用改进模拟退火算法实现关节臂式坐标测量机的参数辨识[J]. 光学精密工程,2009,(10):2499-2505.

[52] 胡永乐,陈子辰,王文,金飞华,蒋诚志. 爆炸容器动态径向变形非接触测量技术[J]. 机械强度,2009,(05):759-763.

[53] 高贯斌,王文,林铿,陈子辰. 关节臂式坐标测量机误差仿真系统建模与分析[J]. 计算机集成制造系统,2009,(08):1534-1540.

[54] 梅德庆,杜小强,陈子辰. 基于滚动导靴-导轨接触模型的高速曳引电梯振动分析[J]. 机械工程学报,2009,(05):264-270.

[55] 林谢昭,应济,陈子辰. 流体环境中静电微悬臂梁的多场耦合仿真分析[J]. 农业机械学报,2009,(03):203-207.

[56] 魏燕定,娄军强,吕永桂,陈子辰. 振动主动控制中线性二次型最优控制问题研究[J]. 浙江大学学报(工学版),2009,(03):420-424.

[57] 林伟青,傅建中,陈子辰,许亚洲. 数控机床热误差的动态自适应加权最小二乘支持矢量机建模方法[J]. 机械工程学报,2009,(03):178-182.

[58] 贺永,傅建中,徐月同,陈子辰. 微热压印成型过程缺陷研究[J]. 浙江大学学报(工学版),2009,(01):83-86+142.

[59] 杜小强,梅德庆,陈子辰. 高速曳引电梯时变元模型与水平振动响应分析[J]. 浙江大学学报(工学版),2009,(01):148-152.

[60] 贺永,傅建中,陈子辰. 微热压成型脱模缺陷分析及其脱模装置[J]. 机械工程学报,2008,(11):53-58.

[61] 范宗尉,杨克己,陈子辰. 任意声场中非规则形状Rayleigh散射体的声辐射力研究[J]. 声学学报(中文版),2008,(06):491-497.

[62] 李磊,魏燕定,陈子辰,沈国强,吕永桂. 机敏杆压电扭转驱动器/传感器优化布置[J]. 振动与冲击,2008,(10):148-151+198-199.

[63] 姚鑫骅,徐月同,傅建中,陈子辰. 基于粗糙集理论的数控机床智能故障诊断研究[J]. 浙江大学学报(工学版),2008,(10):1719-1724.

[64] 季国顺,王文,陈子辰. 基于预估-校正公式的参数曲线插补算法[J]. 浙江大学学报(工学版),2008,(10):1765-1769.

[65] 林伟青,傅建中,许亚洲,陈子辰. 基于LS-SVM与遗传算法的数控机床热误差辨识温度传感器优化策略[J]. 光学精密工程,2008,(09):1682-1687.

[66] 季国顺,王文,陈子辰. 数控多轮廓加工走刀空行程路径优化[J]. 农业机械学报,2008,(07):154-158+172.

[67] 孔天荣,梅德庆,陈子辰. 磁流变智能镗杆的切削颤振抑制机理研究[J]. 浙江大学学报(工学版),2008,(06):1005-1009.

[68] 林伟青,傅建中,许亚洲,陈子辰. 基于最小二乘支持向量机的数控机床热误差预测[J]. 浙江大学学报(工学版),2008,(06):905-908.

[69] 陆华才,徐月同,陈子辰. 基于内模控制的永磁直线同步电动机速度控制[J]. 电工技术学报,2008,(05):24-28.

[70] 陆华才,徐月同,杨伟民,陈子辰. 无位置传感器表面式永磁同步直线电机初始位置估计新方法[J]. 中国电机工程学报,2008,(15):109-113.

[71] 贺永,傅建中,陈子辰. 微热压成型过程聚合物流动特性研究[J]. 浙江大学学报(工学版),2008,(05):858-862.

[72] 徐爱群,项占琴,陈子辰. 采油用井下声辐射器[J]. 机械工程学报,2008,(05):220-225.

[73] 陆华才,徐月同,杨伟民,陈子辰. 表面式永磁直线同步电机初始位置检测方法[J]. 浙江大学学报(工学版),2008,(05):835-838.

[74] 林谢昭,应济,陈子辰. 静电致动硅膜板的宏模型建立方法[J]. 光学精密工程,2008,(05):839-844.

[75] 贺永,傅建中,陈子辰. 热压成型装备精密温控研究[J]. 光学精密工程,2008,(05):845-850.

[76] 李欣欣,王文,陈戬恒,陈子辰. 超磁致伸缩致动器的广义最小方差-模糊PID控制方法[J]. 光学精密工程,2008,(04):642-650.

[77] 徐爱群,唐志峰,项占琴,陈子辰. 基于超磁致伸缩材料的采油振动器研究[J]. 浙江大学学报(工学版),2008,(03):544-548.

[78] 季国顺,王文,贺福强,陈子辰. 皮革裁剪拐角轮廓样条曲线重构[J]. 浙江大学学报(工学版),2008,(03):392-396.

[79] 贺永,傅建中,陈子辰. 微热压印过程中聚合物流动形貌的研究[J]. 光学精密工程,2008,(02):270-278.

[80] 林伟青,傅建中,许亚洲,陈子辰. 基于在线最小二乘支持向量机的数控机床热误差建模与补偿[J]. 计算机集成制造系统,2008,(02):295-299.

[81] 潘雪增,姚鑫骅,傅建中,陈子辰. 基于回卷恢复的数控系统实时容错调度策略[J]. 浙江大学学报(工学版),2007,(12):2011-2016.

[82] 张春良,梅德庆,陈子辰. 微制造隔振平台振动的模糊广义预测控制[J]. 机械工程学报,2007,(12):194-202.

[83] 梅德庆,汪延成,陈子辰. 基于应力集中的压阻式微悬臂梁设计(英文)[J]. 纳米技术与精密工程,2007,(04):277-280.

[84] 相恒富,傅建中,陈子辰. 三维瞬态激光烧蚀聚合物微流道动态界面研究[J]. 浙江大学学报(工学版),2007,(11):1908-1911.

[85] 余佩琼,王涌,杨伟民,陆华才,陈子辰. UKF在永磁直线同步电动机无位置传感器控制中的应用[J]. 机械工程学报,2007,(11):149-153.

[86] 杨晓京,陈子辰,刘盛,樊瑜瑾. 基于旋转体视的润滑油固体颗粒污染物三维外型检测[J]. 润滑与密封,2007,(10):8-11+32.

[87] 李欣欣,王文,陈戬恒,陈子辰. Jiles-Atherton模型的超磁致伸缩驱动器磁滞补偿控制[J]. 光学精密工程,2007,(10):1558-1563.

[88] 余佩琼,陈子辰. 基于UKF的永磁直线电机进给系统位置与速度估计[J]. 电工技术学报,2007,(09):56-61.

[89] 杨晓京,陈子辰,刘剑雄,傅中裕. 基于ANSYS静刚度分析的XK640数控铣床关键零部件优化设计[J]. 机床与液压,2007,(09):42-45.

[90] 余佩琼,陆亿红,王涌,杨伟民,陈子辰. 永磁直线同步电动机无位置传感器控制系统的研究[J]. 中国电机工程学报,2007,(24):53-57.

[91] 杨晓京,陈子辰,樊瑜瑾,李浙昆. 磨粒微观滑动接触过程热效应的有限元分析[J]. 润滑与密封,2007,(08):1-4.

[92] 季国顺,王文,陈子辰. 数控系统参数曲线加工最大进给速度选择[J]. 农业机械学报,2007,(07):199-201.

[93] 徐爱群,项占琴,陈子辰. 井下振动器动力学建模及振动特性分析[J]. 振动与冲击,2007,(07):93-96+134+183-184.

[94] 杨晓京,陈子辰. 软件重用技术在开放式数控系统开发中的应用研究[J]. 机床与液压,2007,(07):207-209+212.

[95] 俞武嘉,傅建中,陈子辰. 五轴加工刀具路径生成的有效加工域规划方法[J]. 机械工程学报,2007,(07):179-183.

[96] 杨晓京,陈子辰,樊瑜瑾,李浙昆. 磨粒磨损中微观切削过程分子动力学模拟[J]. 农业机械学报,2007,(05):161-164.

[97] 徐爱群,项占琴,陈子辰,吕福在,唐志峰. 超磁致伸缩执行器自感知机理研究[J]. 浙江大学学报(工学版),2007,(05):705-708.

[98] 吕永桂,魏燕定,陈子辰. 空间两连杆柔性构件弯扭耦合振动主动控制[J]. 浙江大学学报(工学版),2007,(05):715-719.

[99] 陆华才,徐月同,杨伟民,陈子辰. 永磁直线同步电机进给系统模糊PID控制[J]. 电工技术学报,2007,(04):59-63.

[100]姚鑫骅,傅建中,陈子辰,潘雪增. 面向数控系统的优化调度算法及容错策略研究[J]. 计算机集成制造系统,2007,(04):768-776.

[101] 杨伟民,徐月同,陆华才,陈子辰. 基于DSP的永磁同步直线电机无位置传感器控制系统[J]. 电机与控制应用,2007,(04):28-32.

[102] 吕永桂,魏燕定,陈子辰. 基于遗传算法的压电扭转驱动器优化布置[J]. 浙江大学学报(工学版),2007,(03):471-474.

[103] 黄学飞,陈子辰,梁艺忠,曹玉华. 基于JSP的自动化立体仓库管理与控制系统[J]. 起重运输机械,2007,(03):36-38.

[104]  李爱林,王文,陈子辰. 机器人化柔性三坐标测量机的设计与研究[J]. 机床   与液压,2007,(03):142-144.

[105]  宁方华,陈子辰,熊励,张云. 协同物流网络的任务协调决策模型及其求解算法[J]. 控制与决策,2007,(01):109-112.

[106]  陈子辰,王爱国,顾建民. 积极发展研究生教育,提高区域高等教育质量——兼论浙江研究生教育发展战略[J]. 高等工程教育研究,2007,(01):97-101.

[107]  贺福强,王文,陈子辰. 基于小波重构的皮革表面检测方法[J]. 仪器仪表学报,2006,(S1):316-318.

[108]  俞武嘉,傅建中,陈子辰. 基于遗传算法的刀具路径优化排布方法[J]. 浙江大学学报(工学版),2006,(12):2117-2121.

[109]   任锟,傅建中,陈子辰. 高速加工中速度前瞻控制新算法研究[J]. 浙江大学学报(工学版),2006,(11):1985-1988.

[110]   张春良,梅德庆,陈子辰. 微制造平台隔振系统仿生设计[J]. 中国机械工程,2006,(21):2278-2281.

[111]    张飞,陈子辰,熊励. 基于Mobile Agent的安全协商交易模型研究[J]. 计算机集成制造系统,2006,(10):1600-1604.

[112]   宁方华,陈子辰,熊励. 熵理论在物流协同中的应用研究[J]. 浙江大学学报(工学版),2006,(10):1705-1708+1782.

[113]  宁方华,陈子辰,熊励. 基于效益协同的物流网络模型研究[J]. 中国机械工程,2006,(20):2151-2154.

[114]  陈子辰,王爱国,顾建民. 研究生教育:“十一五”期间浙江高等教育发展的战略重点[J]. 浙江社会科学,2006,(05):120-123.

[115] 姚鑫骅,潘雪增,傅建中,陈子辰. 数控系统的混合任务模型及其最优调度算法研究[J]. 浙江大学学报(工学版),2006,(08):1315-1319.

[116]  王晓林,陈子辰. 标杆管理中大小标杆量化分析[J]. 浙江大学学报(工学版),2006,(08):1418-1422.

[117] 江思定,张云,陈子辰,张玲. 皮革企业准柔性化主生产计划的制定方法[J]. 工业工程与管理,2006,(03):101-104+108.

[118] 相恒富,傅建中,陈子辰. 激光加工聚合物微流道暂态弹性热应力分析[J]. 传感技术学报,2006,(05):2011-2014.

[119] 梅德庆,孔天荣,陈子辰. 基于神经元S型传递函数的磁流变阻尼器力学模型研究[J]. 功能材料,2006,(05):776-779.

[120]  张飞,陈子辰,熊励,梅益. 企业协同商务的可持续性分析[J]. 系统工程理论与实践,2006,(04):104-107+113.

[121]  张海峰,傅建中,陈子辰. PLC控制的聚合物微流控芯片压印机设计[J]. 机床与液压,2006,(02):69-71.

[122]  林庆武,梅德庆,黄严峻,陈子辰. 皮革智能排样系统的开发[J]. 机电工程,2005,(12):4-7.

[123]  贺永,傅建中,陈子辰. 聚合物微流控芯片热压成型的建模研究[J]. 浙江大学学报(工学版),2005,(12):1911-1914.

[124]  相恒富,傅建中,陈子辰. 激光加工聚合物微流控芯片暂态烧蚀模型研究[J]. 浙江大学学报(工学版),2005,(12):1920-1924.

[125] 姚鑫骅,潘雪增,傅建中,陈子辰. 微制造数控系统的实时有限状态机建模研究[J]. 浙江大学学报(工学版),2005,(12):1965-1968+1997.

[126]  任永利,傅建中,陈子辰. 微压印聚合物微流控芯片的传热分析研究[J]. 机械科学与技术,2005,(11):1359-1361.

[127] 魏燕定,吕永桂,吕存养,文耀华,陈子辰. 机器人柔性臂的扭转振动主动控制研究[J]. 浙江大学学报(工学版),2005,(11):1761-1764+1810.

[128]  徐月同,傅建中,陈子辰. 磨床PMLSM进给单元鲁棒非线性控制器研究[J]. 浙江大学学报(工学版),2005,(11):1765-1768.

[129] 沈洪垚,傅建中,陈子辰. 基于ARM和DS18B20的数字测温系统[J]. 机电工程,2005,(11):50-53.

[130] 李健,王文,陈子辰. 基于激光测头和数控机床集成的非接触测量系统开发[J]. 机床与液压,2005,(10):30-31.

[131]  潘开林,傅建中,陈子辰. 永磁直线同步电机的磁阻力分析及其优化[J]. 浙江大学学报(工学版),2005,(10):169-174.

[132] 何闻,沈润杰,陈子辰. 离心加速度与热耦合机理的研究[J]. 浙江大学学报(工学版),2005,(09):171-175.

[133]   梅德庆,刚宪约,陈子辰. 一种快速高精度Duhamel积分算法[J]. 浙江大学学报(工学版),2005,(08):1152-1155.

[134]  徐爱群,项占琴,陈子辰. 非接触式自动螺纹检测仪的研制[J]. 浙江大学学报(工学版),2005,(08):1179-1183.

[135]  梅益,陈子辰,谢庆生,熊励. 面向ASP应用服务的系统集成研究[J]. 中国机械工程,2005,(16):1447-1450.

[136] 陈昆昌,陈子辰. 产品设计过程中特性基因的继承与变异[J]. 机械设计与研究,2005,(04):13-15.

[137]  吴世雄,王文,陈子辰. 测点数据生成刀具路径研究[J]. 计算机辅助设计与图形学学报,2005,(08):1704-1709.

[138]  余佩琼,梅德庆,陈子辰,傅龙珠. 超磁致伸缩微致动器结构优化与静态特性试验[J]. 农业机械学报,2005,(07):114-117.

[139]   陈昆昌,陈子辰. 大批量定制产品仿生建模基础[J]. 机电工程,2005,(07):36-41.

[140]  王丽萍,孙朝晖,邱飞岳,陈子辰. 基于多媒体的弱视治疗系统研制[J]. 浙江大学学报(工学版),2005,(07):967-970.

[141]   陈昆昌,陈子辰. 基于可拓学模型的大批量定制实施方法分析[J]. 机电工程,2005,(06):60-63.

[142]  徐月同,傅建中,陈子辰. 永磁直线同步电机进给系统H_∞控制策略的研究[J]. 浙江大学学报(工学版),2005,(06):789-794.

[143]   徐月同,傅建中,陈子辰. 永磁直线同步电机推力波动优化及实验研究[J]. 中国电机工程学报,2005,(12):122-126.

[144]  宁方华,陈子辰,熊励. 基于多维空间的商务协同要素分析[J]. 中国机械工程,2005,(11):997-1001.

[145]  张春良,梅德庆,陈子辰. 电磁式振动给料机的混合隔振研究[J]. 兵工学报,2005,(03):362-366.

[146]   陈子辰,费英勤,胡礼祥. 贯彻新《规定》 完善学生申诉制度[J]. 中国高等教育,2005,(08):12-13.

[147]  张飞,陈子辰,熊励,梅益. 网络协同商务链的和谐监控机制[J]. 浙江大学学报(工学版),2005,(03):16-19.

[148]  徐爱群,项占琴,陈子辰,吕福在. 基于GMM的高速点阵式喷头研究[J]. 中国机械工程,2005,(06):69-73.

[149]  金晟,傅建中,陈子辰. 基于ARM的嵌入式数控系统设计[J]. 机电工程,2005,(02):56-58.

[150]   李国平,陈子辰. 超磁致伸缩驱动器输出特性的实验研究[J]. 兵工学报,2005,(01):136-139.

六、专利成果

[1] 梅德庆, 薛岱, 汪延成, 陈子辰. 基于声表面波的柔性微米线电极的制造方法及装置, CN105703734A[P]. 2016.

[2] 冯艳冰, 梅德庆, 钱淼, 贺行, 陈子辰. 一种层叠式双面多蛇形微通道重整制氢反应器, CN204454569U[P]. 2015.

[3]  席凯伦, 汪延成, 梅德庆, 梁观浩, 陈子辰. 一种基于压敏导电橡胶的柔性触滑觉复合传感阵列, CN204154423U[P]. 2015.

[4]  席凯伦, 梅德庆, 梁观浩, 戴宇, 陈子辰. 一种基于压阻式和电容式组合的柔性三维力触觉传感器, CN203672526U[P]. 2014.